Vescom Langor — 126 in x 246 ft

Polyester weave, coated two sides with PVC

Linear, Vertical

Grey PVC

14 oz linear yard

Liquid coating can be applied for extra protection and finish.

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software., If a custom profile is not available, the on-board media setting, Cast Vinyls, typically used for vehicle wraps, is a good place to start., Optimal printer settings will vary from printer manufacturers. A suggested starting point is setting the pre- and post-heaters to 122° F (50° C).

Contact the ink manufacturer for light-fastness data., The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed.

Class A

3 in ID core

For end use: -40° to 176° F (-40°-80° C)., For printing: 60° to 80° F, 50% RH relative humidity.

70° F (21° C), 50% RH (a controlled environment is recommended), store vertically in original packaging

White

Latex, Low-solvent, Solvent, UV-curable

1 year storage in original package under recommended storage conditions above.